Solid shaft encoder thickness 29mm S52 heavy duty encoder ABZUVW
phase IP66 high speed rotary encoder
Notice for encoder installation
1. Please read the encoder specification carefully before
installation
2. Encoder is belong to precision instrument, so we should avoid
shock or vibration to protect interior parts.
3. The power supply voltage must be holded within specified range,
or encoder could be destroyed.
4. Notice coaxially requirements when you install the power shaft,
please use flexible coupling and do not press encoder forcibly.
5. Shielding cable of encoder must be connected to avoid
electromagnetism interference of alternating current, cables of
encoder should be layout individually.
6. Wiring diagram connection should be strictly follow the
specified color in catalogue, or encoder interior circuit may be
destroyed
7. Encoder should be apart from powerful magnetic field, dust, oil,
water, higher (lower) temperature and caustic or flammable material
during working.
8. The encoder cable signal can’t be drew or bent forcibly.
Quick description for S52 solid shaft encoder
Encoder type: Incremental encoder
External diameter: 51mm
Thickness: 29mm
Installation dimension: diameter 40mm
Shaft length: 16mm
Cable length: 1M (cable length could be added appropriately
require, but it need payment individually)
Certification: CE
Mark to Space ratio: 45% to 55%
Factory Encoder Production Capability
5000 pieces per month
-------- Production Line Capacity
50000 pieces per year
--------Actual Units Produced (Previous Year)
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and
ship on time
S52 encoder Characteristics
| Items | Basic parameters |
| Brand | HENGXIANG |
| Output mode | NPN&PNP |
| Voltage output |
| Push-pull output |
| Difference output(TTL,HTL,RS422) |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
| starting torque | less than 5 x 10-3 N.m |
| Intertia moment | less than 3x 10-6kg.m2 |
| Shaft load | Radial 50N; Axial 30N |
| Top REV | 3000RPM ;IP65≤2000r rpm |
| Bearing life | 1.5x109 revs at rated load(100000hrs at 2500RPM) |
| Environmental temperature | Operating:-20 ～+80°；storage:-25 ～+85° |
| Environmental humidity | Operating and storage: 35-85%RH(noncondensing) |
| Vibration(endure) | Amplitude 0.75mm,5-55Hz,2 hours for three axis individually |
| Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
| Shaft Material | Stainless steel |
| Shell Material | die cast aluminum |
| Cable length | 1000mm(cable with shielding) |
| Protection grade | IP50 ; IP65 |
| Cable length | 1M (cable length could be added appropriately by |
| | require, but it need payment individually) |
| Certification | CE |
| package | Carton box |
| Net weight | About 300g (with package) |
