Flange 65*65mm solid shaft encoder 20000ppr 600rpm S65F encoder
push-pull output
Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow
shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail
parameters
S65F Encoder Detail Specification
| Items | Basic parameters |
| External dimensions | External diameter: 65mm,Thickness: 52.5mm |
| Installation Size:48mm, Flange:67*67*7mm |
| Shaft diameter: 8mm |
| Resolution | 50;60;100;200;250;256;300;360;400;450;500;512;600; |
| 720;1000;1024;1200;1250;1440;1800;2000;2048;2500 |
| ;2880;3000;3600;4000;4096;5000;5760;8192;10000; |
| 11520;16384;20000; 23040 |
| Output phase | Phase A,B,Z or A- B- Z- |
| Supply voltage | DC5V & DC8-30V |
| Outlet type | Cable out from side with metal sleeve |
| Socket out from side |
| | NPN/PNP(Open Collector Output) |
| | Voltage output |
| Output mode | Push-pull output |
| | line drive (26LS31) TTL |
| | line drive(DC8-30V) HTL |
| Environmental temperature | Operating temperature: -20~+80° (Non icing) |
| Storage temperature: -25~+85° (Non icing) |
| Environmental humanity | Operating and storage: 35~85%RH (non-condensing) |
| Protection grade | IP50 & IP65 |
| Cable length | 1M |
| Shell | aluminum |
| package | Carton box |
| Net weight | About 190g (with package) |
| Certification | CE |
FAQ
Q: Can your encoder be customized?
A: Yes, our encoder can be customized according to your
requirements,
Q: Do you test your encoder product before shipment?
A: Yes, we 100% test and examine every piece before shipping to
make sure it work well on your device.
Q: Where is your factory?
A: Our factory is located on Shanghai City.
Q: Can I pay a visit to your factory?
A: Yes, you we welcome to visit our factory at any time if
convenient.
Q: How long is your delivery time?
A: Usually 3 working days for sample, 7-15 days for mass
production,
The production date is according to order quantity.
Q: How to get the latest price?
A: Contact us and tell me the encoder model selection.
Q: How to select a right encoder model?
A: A right encoder model is based on different applications and
parameters, you could contact us for technical support if you have
any query
Encoder catalogue
Please email us directly or contact online service right now to get
the latest catalogue.
Shipment
1. Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
2. You could select the express according to your requirements if
freight collector
3. If you do not have any courier account, we will check and find a
cheapest and safety express for you.
4. Our factory has 30% discount with most courier company, so price
could be as cheap as possible.
Package
Each single encoder is packed into a single safe carton with
protecting bubble.
Then all encoders will be put into a bigger carton to prepare
shipment.
Application
VFFS machine
Packing machinery
Capsule filling machine
Pharmaceutical machine
Gearbox
DC garage door motor
DC servo motor
Stock driver
PMDC geared motor
Brushless dc motor
Servo motor
Drawing machine
VFD
Leather machine
Technical Theory
The differential outputs have the highest frequency response
capability and the best noise immunity. To ensure this the receiver
should also be a differential.
Replacement of Older Output Drivers
A logic gate interprets certain input voltages as high (logic 1) or
low (logic 0).
TTL (transistor-transistor-logic): A signal above 2 V is
interpreted as logic 1 and a signal less than 0.8 V is interpreted
as logic 0. The output voltage ranges between 0-5 V.
HTL (high-threshold-logic): A signal above 3 V is a logic 1 and a
signal less than 1 V is a logic 0. The high output signal level is
dependent from the supply voltage. Because of the higher voltage
difference between logic 0 and 1, the HTL logic is more immune to
interference and more resistant against electrical noise.
Mechanical degree is the actual rotation of the shaft in degrees.
Electrical degree is used for electrical signals. The required time
for completing one alternating voltage/current cycle is defined as
360 electrical degrees (el°). For incremental encoders, one cycle
is equal to one complete pulse. With a given PPR the electrical
degree can be converted to mechanical degree for any incremental
encoder.
